Remote CW straight key operations using the SmartSDR for iOS and the new CTR2-Dial

-

This week I received the new CTR2-Dial, a new MIDI controller for remote ham radio operations from Lynovation (Lynn Hanson NU7Q) with support for RHR, Thetis and Flexradio.   

This new controller is enhanced version of CTR2-MIDI but features a color touchscreen display.  The dial is completely programmable and support dozens of buttons and dials which simulate Mode, Band, VFO, RIT/XIT functions, etc.  

The platform is still very much under development so I flashed the firmware to the latest version (1.00.04).  I loaded the default map into SmartSDR iOS and updated Trigger Straight Key (98) and PTT Push (99) configs in the map file.   

The controller is connected via USB to my iPhone via an OTG adapter to power the Dial and communicate with SmartSDR.  The straight key connects to the TRS jack onthe dial. 

I made a few test calls and RBN spotted me right away which is always the best part of the test.   The Rest of the controls (VFO, Volume, Buttons etc) seem to work as they should.

I’ll be taking the dial on biz travel this week and will test it extensively from the hotel in the evening.    73,  Chris de WX7V




Resources:

https://ctr2.lynovation.com/ctr2-dial/

https://groups.io/g/CTR2

https://groups.io/g/CTR2/files/CTR2-Dial%20Files


Quick unscripted demo of my initial tests.  Keep in mind I'm no AV production expert hi hi! 




Comments

Post a Comment

Popular posts from this blog

Remote CW with RKI 1.05 and Sparkfun FT231X breakout board

-
Image
I've created a workable solution for sending CW via a "straight key" to my remote Flexradio 6600 at the lake using RemoteKeyerInterface (RKI) and a simple Serial/USB circuit.   RKI is only available for Windows. RKI enables you to use paddles or a straight key to send CW through a remote Flex‑6000 transceiver.  After several iterations I've settled on a design using the Sparkfun FT-231x breakout board and RKI v1.05 that was originally posted by Gary KT7AZ on the RKI  groups.io forum .   However, to send CW reliably via a straight key - there were two main problems I had to solve. First,  I had to resolve the network latency and buffer bloat in my shack's network by setting up a router with Smart Queue Management.   The Ubiquity EdgeRouter  was recommended by a friend of mine (Larry N1FG) and has been working great.  I'm using the 4 port Edgerouter X which was only $50 at microcenter (open box special).  No more audio stutterin...
Read more

FTdx3000 - configuring external panadapter using SDRPlay RSP1A

-
Image
 The panadapter on the FTdx3000 is fine but not great.   I'm using SDRuno with the SDRPlay RSP1A  which is a significant upgrade!   Cost was minimal since I already had a RSP1a stored in a  drawer waiting for a problem to solve.   Hardware configuration is straight forward.  On the back of the FTdx3000, connect the IF OUT (RCA connector) to antenna input on the RSP1a.  I needed a cable with RCA to SMA adapter.  Plug in USB connections from the RSP1a to the computer, and another from the FTdx3000 radio to your computer. Download and install OmniRig from dxatlas.  Omnirig provides CAT control for the Yaesu radio - allowing you to automatically tune into any frequency by clicking signal in panadapter waterfall.   Find the SiliconLabs Enhanced Comm port (use Ports in Device Manager)- you need to use the same com port and speed settings in the omnirig and sdruno configurations. Start sdruno, click on settings - the...
Read more

BENS BEST BENT WIRE

-
Image
Update 11/19/23 - Tribute for Bill Crane, SK 10/26/23: https://youtu.be/Znyqq9f93r0?si=bxPV0zVmGN7oWo_u ++ Update August 22, 2022.   I was able to find Bill Crane W9ZN on the air by looking for his spots on RBN .   Took me a while to see the pattern on when and where he's be on frequency, but not only did we make the QSO, we exchanged cards as well!  This is one of my favorite QSL cards that I've collected so far.  Thank You Bill!     73 Chris de WX7V ==================================== Last month I asked a members of the Straight Key Century Club  what was their favorite way to warm up before sending morse code.  I got a lot of input - from, "Just jump right in" to sending the Alphabet and the Numbers 0-9.   My favorite answer is to practice sending Bens Best Bent Wire, with the letters and numbers run together so that the code produced sounds similar to a march.  Apparently this was taught by the RAF,  merchan...
Read more