20M Open to JA and VK

-

Had some FB QSOs this morning with Take-San (JR2IUB), Masa (JH4XVN/0), Mark (VK3MJ) and Kev (VK3KEV).  My key this was the W1SFR Slater which is my favorite cootie / sideswiper.

Rig Flexradio 6600 running 80w; Ant Hexbeam up 35ft/10m, beaming 270d west from Dallas. 

Condx: KP 2.33 (Quiet), A:5 SFI 154 SN 134.  Temp 23C / 73F.  Rain expected later today.




The bands have been in great conditions past few days.



 73 Chris de WX7V

Comments

Post a Comment

Popular posts from this blog

Hamclock 4.10 Up and Running WSL

-
Image
I was able to get Hamclock up and running in Christmas Eve just in time to see the Santa tracker.   Very nice edition to the shack — its a fully configurable kiosk-style application that provides real time space weather, radio propagation models, operating events and other information particularly useful to the radio amateur. I’ve been running Hamclock in a full screen in a Chrome browser window (F11 toggles full screen).  Its  FB to access from my tablet in addition to the host PC on my local private network. With a few commands provided in the step by step guide by W4CAE you can run HAMCLOCK on Windows 10 / 11 using the Ubuntu  WSL. To learn more about Windows Linux Subsystem (WSL), click https://learn.microsoft.com/en-us/windows/wsl/about . My version is compiled and installed using the hamclock-web-1600x960 web server only parameters.  For reference  http://127.0.0.1:8081/live.html .   Use port 8082 for RO interface if you should want to make ...
Read more

FTdx3000 - configuring external panadapter using SDRPlay RSP1A

-
Image
 The panadapter on the FTdx3000 is fine but not great.   I'm using SDRuno with the SDRPlay RSP1A  which is a significant upgrade!   Cost was minimal since I already had a RSP1a stored in a  drawer waiting for a problem to solve.   Hardware configuration is straight forward.  On the back of the FTdx3000, connect the IF OUT (RCA connector) to antenna input on the RSP1a.  I needed a cable with RCA to SMA adapter.  Plug in USB connections from the RSP1a to the computer, and another from the FTdx3000 radio to your computer. Download and install OmniRig from dxatlas.  Omnirig provides CAT control for the Yaesu radio - allowing you to automatically tune into any frequency by clicking signal in panadapter waterfall.   Find the SiliconLabs Enhanced Comm port (use Ports in Device Manager)- you need to use the same com port and speed settings in the omnirig and sdruno configurations. Start sdruno, click on settings - the...
Read more

BENS BEST BENT WIRE

-
Image
Update 11/19/23 - Tribute for Bill Crane, SK 10/26/23: https://youtu.be/Znyqq9f93r0?si=bxPV0zVmGN7oWo_u ++ Update August 22, 2022.   I was able to find Bill Crane W9ZN on the air by looking for his spots on RBN .   Took me a while to see the pattern on when and where he's be on frequency, but not only did we make the QSO, we exchanged cards as well!  This is one of my favorite QSL cards that I've collected so far.  Thank You Bill!     73 Chris de WX7V ==================================== Last month I asked a members of the Straight Key Century Club  what was their favorite way to warm up before sending morse code.  I got a lot of input - from, "Just jump right in" to sending the Alphabet and the Numbers 0-9.   My favorite answer is to practice sending Bens Best Bent Wire, with the letters and numbers run together so that the code produced sounds similar to a march.  Apparently this was taught by the RAF,  merchan...
Read more