New PC Build and Benchmarks!

-
A week before the Coronavirus lockdown, I replaced the old Shuttle XPC computer that I built in 2010 as my primary workstation at home.  A lot has changed since then!

I decided on a stylish, full sized  HTPC case with ATX motherboard instead of the Shuttle barebones kits I've been using from Newegg since 2004.

I sourced the parts thru the local Microcenter in Richardson - apparently Fry's isn't what it used to be, and I didn't want to wait on shipping.  Special thanks to The Tech Buyer's Guru for design inspiration and component recommendations!

New Build Specs

Silverstone Grandia GD09 case with aluminum finish
Gigabyte B450 AORUS PRO WIFI Motherbord
PowerSpec 550 Watt 80 Plus Bronze ATX Power Supply
AMD Ryzen 5 3400G with Radeon Vega Graphics APU
Crucial 2x8GB Ballistix DDR4-3200 Black Memory - 16GB Total

Reused Components:
Samsung 850 EVO 500GB M.2 SATA SSD
LG Super Multi Internal 16x Blu-ray Optical Drive (WH16NS40)

Old and New Benchmarks

I decided to run a few benchmarks before carting the old machine off to the garage (to save for spare parts, of course!).  

glxgears (set vblank_mode=0 to override monitor refresh rate)
glmark2 OpenGL 2.0 benchmark
UNiGiNE Superposition (2017) and Heaven4 (2009)
hardinfo (sudo apti-get install hardinfo)


Benchmark Old Machine New Machine
glxgears 1,536 FPS            12,289 FPS
glmark2 230            4,376
Heaven4 (2009) 28 (1.1 FPS avg)            742 (29.5 FPS avg)
Superposition (2017)         Failed           2,425 @1080P Medium, HQ
CPU Blowfish         3.38           1.38 (Lower is better)
CPU Cryptohash         362.19           1135.34 (Higher is better)

Old:   Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz, discrete Nvidia GeForce 8400 GS

New: AMD Ryzen 5 3400G, integrated Radeon Vega Graphics


Ubuntu Studio 19.04 is my operating system of choice at home.  Linux is very secure and this distribution has great multimedia support, including Firewire (IEEE 1394).  

Comments

chris said…
Screen Artifact workaround here:

https://askubuntu.com/questions/1208271/artifacts-with-amd-ryzen-5-3400g-with-radeon-vega-graphics-%C3%97-8
5:26 AM
Post a Comment

Popular posts from this blog

Remote CW with RKI 1.05 and Sparkfun FT231X breakout board

-
Image
I've created a workable solution for sending CW via a "straight key" to my remote Flexradio 6600 at the lake using RemoteKeyerInterface (RKI) and a simple Serial/USB circuit.   RKI is only available for Windows. RKI enables you to use paddles or a straight key to send CW through a remote Flex‑6000 transceiver.  After several iterations I've settled on a design using the Sparkfun FT-231x breakout board and RKI v1.05 that was originally posted by Gary KT7AZ on the RKI  groups.io forum .   However, to send CW reliably via a straight key - there were two main problems I had to solve. First,  I had to resolve the network latency and buffer bloat in my shack's network by setting up a router with Smart Queue Management.   The Ubiquity EdgeRouter  was recommended by a friend of mine (Larry N1FG) and has been working great.  I'm using the 4 port Edgerouter X which was only $50 at microcenter (open box special).  No more audio stutterin...
Read more

BENS BEST BENT WIRE

-
Image
Update 11/19/23 - Tribute for Bill Crane, SK 10/26/23: https://youtu.be/Znyqq9f93r0?si=bxPV0zVmGN7oWo_u ++ Update August 22, 2022.   I was able to find Bill Crane W9ZN on the air by looking for his spots on RBN .   Took me a while to see the pattern on when and where he's be on frequency, but not only did we make the QSO, we exchanged cards as well!  This is one of my favorite QSL cards that I've collected so far.  Thank You Bill!     73 Chris de WX7V ==================================== Last month I asked a members of the Straight Key Century Club  what was their favorite way to warm up before sending morse code.  I got a lot of input - from, "Just jump right in" to sending the Alphabet and the Numbers 0-9.   My favorite answer is to practice sending Bens Best Bent Wire, with the letters and numbers run together so that the code produced sounds similar to a march.  Apparently this was taught by the RAF,  merchan...
Read more

FTdx3000 - configuring external panadapter using SDRPlay RSP1A

-
Image
 The panadapter on the FTdx3000 is fine but not great.   I'm using SDRuno with the SDRPlay RSP1A  which is a significant upgrade!   Cost was minimal since I already had a RSP1a stored in a  drawer waiting for a problem to solve.   Hardware configuration is straight forward.  On the back of the FTdx3000, connect the IF OUT (RCA connector) to antenna input on the RSP1a.  I needed a cable with RCA to SMA adapter.  Plug in USB connections from the RSP1a to the computer, and another from the FTdx3000 radio to your computer. Download and install OmniRig from dxatlas.  Omnirig provides CAT control for the Yaesu radio - allowing you to automatically tune into any frequency by clicking signal in panadapter waterfall.   Find the SiliconLabs Enhanced Comm port (use Ports in Device Manager)- you need to use the same com port and speed settings in the omnirig and sdruno configurations. Start sdruno, click on settings - the...
Read more