12M DX Open for Business 3/15/25

-

 I had a lot of fun working 12M today.   Many good DX contacts as you can see from my log below.   KP 1.67 (Quiet), A:25 SFI 180 Sunspot: 147.   

We're at the height of Solar Cycle 25  which is expected to peak in activity in 2025.   The solar minimum between Solar Cycle 24 and 25 - the period when the sun is least active - happened in December 2019, when the 13-month smoothed sunspot number fell to 1.8  

Solar maximum is expected in July 2025, with a peak of 115 sunspots.

QSO Map



RBN Spots on 12M calling CQ WX7V




Comments

Post a Comment

Popular posts from this blog

FTdx3000 - configuring external panadapter using SDRPlay RSP1A

-
Image
 The panadapter on the FTdx3000 is fine but not great.   I'm using SDRuno with the SDRPlay RSP1A  which is a significant upgrade!   Cost was minimal since I already had a RSP1a stored in a  drawer waiting for a problem to solve.   Hardware configuration is straight forward.  On the back of the FTdx3000, connect the IF OUT (RCA connector) to antenna input on the RSP1a.  I needed a cable with RCA to SMA adapter.  Plug in USB connections from the RSP1a to the computer, and another from the FTdx3000 radio to your computer. Download and install OmniRig from dxatlas.  Omnirig provides CAT control for the Yaesu radio - allowing you to automatically tune into any frequency by clicking signal in panadapter waterfall.   Find the SiliconLabs Enhanced Comm port (use Ports in Device Manager)- you need to use the same com port and speed settings in the omnirig and sdruno configurations. Start sdruno, click on settings - the...
Read more

Hamclock 4.10 Up and Running WSL

-
Image
I was able to get Hamclock up and running in Christmas Eve just in time to see the Santa tracker.   Very nice edition to the shack — its a fully configurable kiosk-style application that provides real time space weather, radio propagation models, operating events and other information particularly useful to the radio amateur. I’ve been running Hamclock in a full screen in a Chrome browser window (F11 toggles full screen).  Its  FB to access from my tablet in addition to the host PC on my local private network. With a few commands provided in the step by step guide by W4CAE you can run HAMCLOCK on Windows 10 / 11 using the Ubuntu  WSL. To learn more about Windows Linux Subsystem (WSL), click https://learn.microsoft.com/en-us/windows/wsl/about . My version is compiled and installed using the hamclock-web-1600x960 web server only parameters.  For reference  http://127.0.0.1:8081/live.html .   Use port 8082 for RO interface if you should want to make ...
Read more

Remote CW with RKI 1.05 and Sparkfun FT231X breakout board

-
Image
I've created a workable solution for sending CW via a "straight key" to my remote Flexradio 6600 at the lake using RemoteKeyerInterface (RKI) and a simple Serial/USB circuit.   RKI is only available for Windows. RKI enables you to use paddles or a straight key to send CW through a remote Flex‑6000 transceiver.  After several iterations I've settled on a design using the Sparkfun FT-231x breakout board and RKI v1.05 that was originally posted by Gary KT7AZ on the RKI  groups.io forum .   However, to send CW reliably via a straight key - there were two main problems I had to solve. First,  I had to resolve the network latency and buffer bloat in my shack's network by setting up a router with Smart Queue Management.   The Ubiquity EdgeRouter  was recommended by a friend of mine (Larry N1FG) and has been working great.  I'm using the 4 port Edgerouter X which was only $50 at microcenter (open box special).  No more audio stutterin...
Read more